The Analog Discovery Studio MTE (Measurement and Test Equipment) cables are the same MTE cables that ship with the Analog Discovery Studio. This set of six cables features male-terminated flywires are perfect for connecting signals to circuits on the Breadboard Canvas. The Power Supply MTE cable is a keyed 2x3 cable that provides access to the ±12V (red, white), variable supplies (red, white), and ground (Black). The channel one oscilloscope MTE cable is used for making differential measurements and is a 2x1 cable with a connection for the positive (orange) and negative (orange/white) oscilloscope channels. The channel two oscilloscope MTE cable is used for making differential measurements and is a 2x1 cable with a connection for the positive (blue) and negative (blue/white) oscilloscope channels. The channel one waveform generator MTE cable is a 2x1 cable and provides access to channel one of the waveform generator and ground. The channel two waveform generator MTE cable is a 2x1 cable and provides access to channel two of the waveform generator and ground. The Digital MTE connector is a 2x10 cable and provides access to the two triggers (grey and grey/white), two grounds (black), and 16 Digital I/O (pink, green, purple, brown, pink/white, green/white, purple/white, brown/white... repeated).